Difference between revisions of "Copy a default VTube configuration to another computer with VTube"

• Back to VTube-STEP
• Back to VTube-LASER

WARNING

The source and target computers should have the same VTube version before copying a configuration to the target computer.

It is safe to copy a configuration from a source VTube computer to a target VTube computer as long as the program versions and build numbers on both computers are identical.

If the versions and builds are not the same, then the VTube target computer may not be able to use the new configuration files.

Click in the top toolbar Information button to check the current version for both VTubes before you copy a configuration.

STEP 1 - Insert a Flash Drive

STEP 2 - System Options

STEP 3 - Press "Export the VTube Configuration"

STEP 4 - Choose a Location for Save

Choose the location for the exported configuration file and press Save.

STEP 5 - VTube Compresses and Stores to a Single File

VTube will export the configuration files to the one compressed file.

STEP 6 - VTube shows a dialog

VTube will show a dialog when it is finished.

STEP 7 - Exit System Options

Exit the System Options menu.

STEP 8 - Remove the Flash Drive

STEP 1 - Insert the Flash Drive

STEP 2 - Save the Project and Press Clear Project

STEP 3 - Enter System Options

STEP 4 - Press the Import VTube Configuration button

STEP 5 - Explore to the Exported Configuration Backup File

STEP 6 - VTube will Warn You

VTube will warn you with a dialog that the default configurations will be reset in this TARGET computer based on the values from the SOURCE computer if you continue.

Press Continue.

STEP 7 - VTube will show complete

VTube will show a dialog when it is finished importing the configuration.

STEP 8 - VTube will close System Options Automatically

After you press OK, VTube will automatically exit the System Options menu.

The new default setup in the TARGET computer will now be active.

STEP 9 - Remove the Flash Drive