Chiyoda Communications with VTube

From ATTWiki
Revision as of 17:25, 2 June 2022 by Mcone (Talk | contribs)

Jump to: navigation, search

Vtube-step logo 1.96.png

VTS2 SplashScreen1.png


Which files are used to create parts in the Chiyoda?

The files used are .CHS files.

Steps to send files between the Chyioda and VTube-STEP

STEP 1

Create a template in the Chiyoda with the number of bends the new part will have.

STEP 2

Save the template created on the Chiyoda onto a thumb drive and bring it to the VTube-STEP computer.

Vtube-v3.2 ATTUSB.png

STEP 3

Load in the desired part into VTube-STEP (must match the bend count on the template created in the bender)

Vtube v3.2 CHSpart.png

STEP 4

In VTube-STEP under the Import/Export tab > Export > load Chiyoda Ex File - CHS

Vtube v3.2 CHS.png


STEP 5

Choose the template file from the thumb drive and load it into VTube.

Vtube-STEP v3.2chstemplate.png

STEP 6

Press the Export to Chiyoda EX Data File button and choose the thumb drive from a persistant path or press Continue with no Selection adn find the thumb drive on the computer.

Vtube-v3.2 exportchs.png

STEP 7

Save the .CHS file to the same thumb drive, remove it and take it back to the bender

Vtube v3.2 importconfig openbackup.png

STEP 8

Load the file in the bender and bend the part

Vtube v2.2 chiyodacontrol.png


Other Pages