Chiyoda Communications with VTube

From ATTWiki
Revision as of 17:11, 2 June 2022 by Mcone (Talk | contribs)

Jump to: navigation, search

Vtube-step logo 1.96.png

VTS2 SplashScreen1.png


Which files are used to create parts in the Chiyoda?

The files used are .CHS files.

Steps to send files between the Chyioda and VTube-STEP

STEP 1

Create a template in the Chiyoda with the number of bends the new part will have.

STEP 2

Save the template created on the Chiyoda onto a thumb drive and bring it to the VTube-STEP computer.

Vtube-v3.2 ATTUSB.png

STEP 3

Load in the desired part into VTube-STEP (must match the bend count on the template created in the bender)

Vtube v3.2 CHSpart.png

STEP 4

In VTube-STEP under the Import/Export tab > Export > load Chiyoda Ex File - CHS

Vtube v3.2 CHS.png


Steps to RESTORE a Configuration from a Backup

STEP 1

Press the System Options button.

Vtube-STEP v3.2 toolbar1 sys.png

STEP 2

Press the RESTORE and Reset VTube Configuration from a VTube Zip Backup File.

Vtube-v3.2 importconfiguration.png

STEP 3

Find and open the backup file.

Vtube v3.2 importconfig openbackup.png

STEP 5

Press Continue in the warning dialog.

Vtube v2.2 importconfig clearoverwrite configuration warning.png

STEP 6

Press OK.

Vtube v3.2 importconfig configuration created.png


Other Pages