Chiyoda Communications with VTube

From ATTWiki
Revision as of 16:55, 2 June 2022 by Mcone (Talk | contribs)

Jump to: navigation, search

Vtube-step logo 1.96.png

VTS2 SplashScreen1.png


Which files are used to create parts in the Chiyoda?

The files used are .CHS files.

Steps to BACKUP the Current Configuration

STEP 1

Create a template in the Chiyoda with the number of bends the new part will have.

Vtube-STEP v3.2 toolbar sys.png

STEP 2

Press the Project Setup tab, and then press the BACKUP VTube Configuration to Zip Backup File button.

Vtube-v3.2 backupexportconfiguration.png

STEP 3

Use the Save dialog to save a configuration backup.

Vtube v3.2 exportconfig saveas.png

STEP 4

VTube will display a dialog with the configuration file that it saved. This file is required for complete configuration of VTube - so you can use it to restore a configuration.

Vtube v3.2 exportconfig whichfilessaved.png


Steps to RESTORE a Configuration from a Backup

STEP 1

Press the System Options button.

Vtube-STEP v3.2 toolbar1 sys.png

STEP 2

Press the RESTORE and Reset VTube Configuration from a VTube Zip Backup File.

Vtube-v3.2 importconfiguration.png

STEP 3

Find and open the backup file.

Vtube v3.2 importconfig openbackup.png

STEP 5

Press Continue in the warning dialog.

Vtube v2.2 importconfig clearoverwrite configuration warning.png

STEP 6

Press OK.

Vtube v3.2 importconfig configuration created.png


Other Pages