Difference between revisions of "Chiyoda Communications with VTube"
From ATTWiki
(→STEP 8) |
(→STEP 8) |
||
| Line 99: | Line 99: | ||
Load the file in the bender and bend the part</td> | Load the file in the bender and bend the part</td> | ||
<td> | <td> | ||
| − | [[image:vtube_v2.2_chiyodacontrol.png| | + | [[image:vtube_v2.2_chiyodacontrol.png|150px]] |
</td> | </td> | ||
</tr> | </tr> | ||
Revision as of 17:21, 2 June 2022
|
|
|
Which files are used to create parts in the Chiyoda?
The files used are .CHS files.
Steps to send files between the Chyioda and VTube-STEP
STEP 1Create a template in the Chiyoda with the number of bends the new part will have. |
|
STEP 2Save the template created on the Chiyoda onto a thumb drive and bring it to the VTube-STEP computer. |
|
STEP 3Load in the desired part into VTube-STEP (must match the bend count on the template created in the bender) |
|
STEP 4In VTube-STEP under the Import/Export tab > Export > load Chiyoda Ex File - CHS |
|
STEP 5Choose the template file from the thumb drive and load it into VTube. |
|
STEP 6Press the Export to Chiyoda EX Data File button adn choose the thumb drive from a persistant path or press Continue with no Selection adn find the thumb drive on the computer. |
|
STEP 7Save the .CHS file to the same thumb drive, remove it and take it back to the bender |
|
STEP 8Load the file in the bender and bend the part |
|
Other Pages
- Back to the VTube-STEP page
