Difference between revisions of "Change the VTube Default Setup"

From ATTWiki
Jump to: navigation, search
Line 2: Line 2:
 
<tr cellpadding=10>
 
<tr cellpadding=10>
 
<td width=225>
 
<td width=225>
[[image:vtube-step_logo.jpg|200px]]<br>
+
[[image:vtube-step_logo_1.96.png|200px]]
 
[[image:vtube-laser_logo_1.96.png|200px]]
 
[[image:vtube-laser_logo_1.96.png|200px]]
 
* Back to [[VTube-STEP]]
 
* Back to [[VTube-STEP]]

Revision as of 16:21, 4 September 2015

Vtube-step logo 1.96.png Vtube-laser logo 1.96.png

VTS2 SplashScreen.png
Vtl screen hd scanner without logo.png



Steps to changing the default setup

STEP 1 - Use the toolbar button to clear VTube.

Vtube toolbar clear.jpg

STEP 2 - Change the values in VTube to whatever you want them be when you perform a clear. Be sure that no tube data exits in this state, or VTube will clear the data to preset values with a tube. (Of course, you can do this, if you really meant to.)

Vtube-laser cleared.jpg

STEP 3 - Press the System Options button.

Vtube-step toolbar sys.jpg

STEP 4 - Press the Project Setup tab, and then press the Set Project Default State button.

Vtube-step setprojdefaultstate.jpg

STEP 5 - Exit the System Options menu. VTube will now clear to the new settings.

Vtube exit systemoptions.jpg


Other Pages