Calibration-Leapfrog-Move Targets

From ATTWiki
Revision as of 21:04, 24 October 2014 by Mcone (Talk | contribs)

Jump to: navigation, search

This conical seat target is useful for calibrating ball probes.

In sets of three or more, they turn into leapfrog or tube move targets that help VTube-LASER operators measure parts longer than the FARO arm reach using the arm leapfrog or tube move.

Vtube-laser target logo.png

Features

  • The targets use a magnetic base to attach to any metalic surface or metal spring clamp.

  • They are good for standard 3 or 6 millimeter FARO probes.

  • The pillar finish is industrial-grade glossy white finish.



Threetargets closeup.png

Clamp Sizes

Various clamp sizes can be made to order.

  • The clamp systems can be designed to hold tube and pipe from 1/8 inch(3mm) up to 6 inch (150mm). The clamps shown on this page are for up to 2.5 inch (63.5 millimeter) diameter parts.)

  • The overall height is 12 inches (305 millimeters).

Vtube-laser targets ballprobe.pngbr>

Vtube-laser target dimensions.png

Tube clamp sizes available:

  • 1.0 inches (25 millimeters)
  • 2.5 inches (63 millimeters)
  • 4.5 inches (114 millimeters)
  • 6.0 inches (152 millimeters)

Other Images

Tubeclamp jaws closeup.png Tubeclamps holdingtube2.png

Other Pages

Retrieved from "http://www.advancedtubular.wiki/index.php?title=Calibration-Leapfrog-Move_Targets&oldid=25844"