Difference between revisions of "Calibration-Leapfrog-Move Targets"

This conical seat target is useful for calibrating ball probes. In sets of three or more, they turn into leapfrog or tube move targets that help VTube-LASER operators measure parts longer than the FARO arm reach using the arm leapfrog or tube move.

• Back to VTube-LASER
  
  

• It has a heavy and stable base. The total weight is 17.5 lbs (8 kg).
  
  
• The pillar is easy to grip.
  
  
• The ball and socket joint allow for flexible positioning.
  
  
• It includes a plastic covered T-handle for better feel during tightening or loosening.
  
  
• The clamp handle can spin close and open with a few hits.
  
  
• The base and pillar finish is industrial-grade glossy black finish.
  
  
• The bottom uses non-slip cork for good surface grip.
  
  

Various clamp sizes can be made to order.

• The clamp systems can be designed to hold tube and pipe from 1/8 inch(3mm) up to 6 inch (150mm). The clamps shown on this page are for up to 2.5 inch (63.5 millimeter) diameter parts.)
  
  
• The overall height is 12 inches (305 millimeters).
  
  

Tube clamp sizes available:

• 1.0 inches (25 millimeters)
• 2.5 inches (63 millimeters)
• 4.5 inches (114 millimeters)
• 6.0 inches (152 millimeters)