Difference between revisions of "Cable Spec 41 - NULL MODEM Crossover DB9 to DB25 Pinout"
From ATTWiki
(Created page with "This pinout is the null modem standard that works with all MiiC benders that use the MiiC BSC protocol. If you purchase a null-modem cable, it will most likely contain this p...") |
|||
| Line 1: | Line 1: | ||
| − | This pinout is the null modem standard that works with all MiiC benders that use the MiiC BSC protocol. | + | This pinout is the null modem standard that works with all MiiC benders that use the MiiC BSC protocol.<br><br> |
| + | If you purchase a pre-made null-modem cable, it will most likely contain this pinout schematic. A purchased cable may also contain DB9 pin 9 to DB25 pin 22 RI - "ring indicator". Since the RJ45 adapters have eight wires, it is necessary to omit this last connection. | ||
<br><br> | <br><br> | ||
Latest revision as of 14:51, 5 July 2014
This pinout is the null modem standard that works with all MiiC benders that use the MiiC BSC protocol.
If you purchase a pre-made null-modem cable, it will most likely contain this pinout schematic. A purchased cable may also contain DB9 pin 9 to DB25 pin 22 RI - "ring indicator". Since the RJ45 adapters have eight wires, it is necessary to omit this last connection.
Other Pages
Back to Cable Spec
