Difference between revisions of "CNC Processor"

From ATTWiki
Jump to: navigation, search
(Motion)
Line 1: Line 1:
===Motion===
+
===Motion Admininstration===
 
The CNC Processor is software that runs invisibly behind CNC Bender.  It is responsible for interpreting the current Process List, and then turning the commands, one line at a time, into action.
 
The CNC Processor is software that runs invisibly behind CNC Bender.  It is responsible for interpreting the current Process List, and then turning the commands, one line at a time, into action.
  

Revision as of 22:55, 29 June 2006

Motion Admininstration

The CNC Processor is software that runs invisibly behind CNC Bender. It is responsible for interpreting the current Process List, and then turning the commands, one line at a time, into action.

TCP/IP Commands

So CNC Processor is the administrator of all the motion around the bender. It services the inputs, outputs, and servos around the bender. It does this be communicating through TCP/IP signals to each module through a device we call a Top Hat.

Offline

CNC Bender can be running without CNC Processor also running. In this state, we refer to CNC Bender as "CNC Bender Offline".


--Mcone 18:53, 29 June 2006 (EDT)