Difference between revisions of "CNC Bender 10.0.6.0i - TCP-IP Error Detection System"
From ATTWiki
(→BETTER FEEDBACK - New TCP/IP Error Detection System) |
(→BETTER FEEDBACK - New TCP/IP Error Detection System) |
||
Line 9: | Line 9: | ||
The TCP/IP log is named TCPIP.log. It can grow to 1 MB in size if errors continue until it is cleared with the Clear TCP/IP Log button in the Network Info menu. After the log reaches 1 MB in size, older entries are removed in order to make room for newer entries. | The TCP/IP log is named TCPIP.log. It can grow to 1 MB in size if errors continue until it is cleared with the Clear TCP/IP Log button in the Network Info menu. After the log reaches 1 MB in size, older entries are removed in order to make room for newer entries. | ||
− | [[Image: | + | [[Image:CNC_Bender_TCPIP_Error_Detection_System.jpg]] |
Latest revision as of 15:09, 2 November 2006
BETTER FEEDBACK - New TCP/IP Error Detection System
In a healthy CNC Bender system, it is normal for TCP/IP errors to never build.
If TCP/IP errors begin to increase, then CNC Bender will warn the user every 60 seconds of this problem.
The operator can check to see if errors are accumulating by using the new Check Network Errors button in the Network Info menu:
The TCP/IP log is named TCPIP.log. It can grow to 1 MB in size if errors continue until it is cleared with the Clear TCP/IP Log button in the Network Info menu. After the log reaches 1 MB in size, older entries are removed in order to make room for newer entries.