Difference between revisions of "Building Tube Assemblies in SOLIDWORKS"

From ATTWiki
Jump to: navigation, search
(STEP 1: Measure One of the Parts in VTube-LASER)
(18 intermediate revisions by one user not shown)
Line 2: Line 2:
 
<tr cellpadding=10>
 
<tr cellpadding=10>
 
<td width=225>
 
<td width=225>
[[image:vtube-step_logo_1.96.png|200px]]
 
 
[[image:vtube-laser_logo_1.96.png|200px]]
 
[[image:vtube-laser_logo_1.96.png|200px]]
 
* Back to [[VTube-STEP]]
 
* Back to [[VTube-STEP]]
Line 14: Line 13:
  
 
__NOTOC__
 
__NOTOC__
 +
VTube-LASER can reverse engineer tube and then build that tube in SOLIDWORKS as a fully-constrained 3D parametric model. This page describes the basic steps to create an assembly from a part using VTube-LASER and SOLIDWORKS.<br><br>
 +
 
[[image:vtube-laser_v2.5_header_to_measure.png|500px]]<br><br>
 
[[image:vtube-laser_v2.5_header_to_measure.png|500px]]<br><br>
VTube-LASER can reverse engineer tube and then build that tube in SOLIDWORKS as a fully-constrained 3D parametric model. This page describes the basic steps to create an assembly from a part using VTube-LASER and SOLIDWORKS.
 
  
  
  
 
==STEP 1: Measure One of the Parts in VTube-LASER==
 
==STEP 1: Measure One of the Parts in VTube-LASER==
[[image:vtube-laser_v2.5_measure header pipe.png|500px]]<br><br>
+
Measure the first pipe and create a measured tube shape.<br><br>
Measure the first pipe and create a measured tube shape.
+
[[image:vtube-laser_v2.5_measure header pipe.png|500px]]
 +
<br><br>
 
<br><br>
 
<br><br>
  
 
==STEP 2: Build the Part in SOLIDWORKS==
 
==STEP 2: Build the Part in SOLIDWORKS==
 +
Use the File tab in Measure Tube Data to send the measured part to SOLIDWORKS.<br><br>
 
[[image:vtube-laser_v2.5_build solidworks.png|500px]]<br><br>
 
[[image:vtube-laser_v2.5_build solidworks.png|500px]]<br><br>
Use the File tab in Measure Tube Data to send the measured part to SOLIDWORKS.
 
 
<br><br>
 
<br><br>
  
==Read More About Tube Elongation==
+
==STEP 3: Save the SOLIDWORKS Part File==
* About [[Multi-Elongation in VTube]]
+
Save the new SOLIDWORKS part to a unique part file on the disk.<br><br>
* [[How to Calculate Tube Elongation Percentage in VTube-LASER]]
+
[[image:vtube-laser_v2.5_solidworks part.png|500px]]<br><br>
 +
<br><br>
  
 +
==STEP 4: Repeat Steps 1 through 3 for all the parts==
 +
Be careful to not move the assembly.  Repeat the first three steps for each tube.<br><br>
 
<br><br>
 
<br><br>
 +
 +
==STEP 5: Start a New Assembly==
 +
Start a new assembly. These steps show how to insert four parts from the SOLIDWORKS part files.<br><br>
 +
[[image:vtube-laser_v2.5_solidworks new assembly.png|500px]]
 +
<br><br>
 +
<br><br>
 +
 +
==STEP 6: Cancel the New Assembly Feature==
 +
In order to insert the tubes in the proper location, we need to establish the common origin in a plane. So press Cancel for Begin Assembly first.<br><br>
 +
[[image:vtube-laser_v2.5_solidworks cancel new assembly.png|500px]]
 +
<br><br>
 +
<br><br>
 +
 +
==STEP 7: Create a Reference Plane at the Origin==
 +
Insert a new plane, then press Finish. It is not necessary to change the location of the plane - since it is already centered around the world origin.<br><br>
 +
[[image:vtube-laser_v2.5_solidworks insert a plane.png|500px]]
 +
<br><br>
 +
<br><br>
 +
 +
==STEP 8: Press Insert Components in Assemblies==
 +
Press Insert Components.<br><br>
 +
[[image:vtube-laser_v2.5_solidworks insert a component.png|500px]]
 +
<br><br>
 +
<br><br>
 +
 +
==STEP 9: Select Multiple SOLIDWORKS Files==
 +
Use Ctrl + or Shift + to select multiple parts to include in the assembly.<br><br>Click on Open.<br><br>
 +
[[image:vtube-laser_v2.5_solidworks select multiple swparts to import.png|500px]]
 +
<br><br>
 +
<br><br>
 +
 +
==STEP 10: Select the Origin==
 +
Point to the middle of the plane and click. Do this for each part until all the parts are inserted at the origin.<br><br>
 +
[[image:vtube-laser_v2.5_solidworks insert part.png|500px]]
 +
<br><br>
 +
<br><br>
 +
 +
==STEP 11: Repeat STEP 10 for Each Part==
 +
Repeat clicking the origin at the center of the plane for each part.<br><br>
 +
[[image:vtube-laser_v2.5_solidworks insert part repeat.png|500px]]
 +
<br><br>
 +
<br><br>
 +
 +
==STEP 12: Exit the Sketch==
 +
Exit the sketch after all the parts are inserted.<br><br>
 +
[[image:vtube-laser_v2.5_solidworks insert part exit sketch.png|500px]]
 +
<br><br>
 +
<br><br>
 +
 +
==The Assembly is Complete==
 +
SOLIDWORKS should show a completed assembly.<br><br>
 +
[[image:vvtube-laser_v2.5_solidworks assembly complete.png|500px]]
 +
<br><br>
 +
<br><br>
 +
  
 
==Other Pages==
 
==Other Pages==

Revision as of 20:41, 2 June 2016

Vtube-laser logo 1.96.png

Vtl screen hd scanner without logo.png


VTube-LASER can reverse engineer tube and then build that tube in SOLIDWORKS as a fully-constrained 3D parametric model. This page describes the basic steps to create an assembly from a part using VTube-LASER and SOLIDWORKS.

Vtube-laser v2.5 header to measure.png


STEP 1: Measure One of the Parts in VTube-LASER

Measure the first pipe and create a measured tube shape.

Vtube-laser v2.5 measure header pipe.png



STEP 2: Build the Part in SOLIDWORKS

Use the File tab in Measure Tube Data to send the measured part to SOLIDWORKS.

Vtube-laser v2.5 build solidworks.png



STEP 3: Save the SOLIDWORKS Part File

Save the new SOLIDWORKS part to a unique part file on the disk.

Vtube-laser v2.5 solidworks part.png



STEP 4: Repeat Steps 1 through 3 for all the parts

Be careful to not move the assembly. Repeat the first three steps for each tube.



STEP 5: Start a New Assembly

Start a new assembly. These steps show how to insert four parts from the SOLIDWORKS part files.

Vtube-laser v2.5 solidworks new assembly.png



STEP 6: Cancel the New Assembly Feature

In order to insert the tubes in the proper location, we need to establish the common origin in a plane. So press Cancel for Begin Assembly first.

Vtube-laser v2.5 solidworks cancel new assembly.png



STEP 7: Create a Reference Plane at the Origin

Insert a new plane, then press Finish. It is not necessary to change the location of the plane - since it is already centered around the world origin.

Vtube-laser v2.5 solidworks insert a plane.png



STEP 8: Press Insert Components in Assemblies

Press Insert Components.

Vtube-laser v2.5 solidworks insert a component.png



STEP 9: Select Multiple SOLIDWORKS Files

Use Ctrl + or Shift + to select multiple parts to include in the assembly.

Click on Open.

Vtube-laser v2.5 solidworks select multiple swparts to import.png



STEP 10: Select the Origin

Point to the middle of the plane and click. Do this for each part until all the parts are inserted at the origin.

Vtube-laser v2.5 solidworks insert part.png



STEP 11: Repeat STEP 10 for Each Part

Repeat clicking the origin at the center of the plane for each part.

Vtube-laser v2.5 solidworks insert part repeat.png



STEP 12: Exit the Sketch

Exit the sketch after all the parts are inserted.

Vtube-laser v2.5 solidworks insert part exit sketch.png



The Assembly is Complete

SOLIDWORKS should show a completed assembly.

Vvtube-laser v2.5 solidworks assembly complete.png




Other Pages