Difference between revisions of "Building Tube Assemblies in SOLIDWORKS"

From ATTWiki
Jump to: navigation, search
(STEP 5: Start a New Assembly)
(STEP 6: Create a Reference Plane at the Origin)
Line 41: Line 41:
  
  
==STEP 6: Create a Reference Plane at the Origin==
+
==STEP 6: Cancel the New Assembly Feature==
 
In order to insert the tubes in the proper location, we need to establish the common origin in a plane. So press Cancel new assembly first.<br><br>
 
In order to insert the tubes in the proper location, we need to establish the common origin in a plane. So press Cancel new assembly first.<br><br>
 
[[image:vtube-laser_v2.5_solidworks cancel new assembly.png|500px]]
 
[[image:vtube-laser_v2.5_solidworks cancel new assembly.png|500px]]
 +
 +
 +
==STEP 7: Create a Reference Plane at the Origin==
 +
Insert a new plane, then press Finish. It is not necessary to change the location of the plane - since it is already centered around the world origin.<br><br>
 +
[[image:vtube-laser_v2.5_solidworks insert a plane.png|500px]]
  
 
==Read More About Tube Elongation==
 
==Read More About Tube Elongation==

Revision as of 19:45, 2 June 2016

Vtube-step logo 1.96.png Vtube-laser logo 1.96.png

Vtl screen hd scanner without logo.png


Vtube-laser v2.5 header to measure.png

VTube-LASER can reverse engineer tube and then build that tube in SOLIDWORKS as a fully-constrained 3D parametric model. This page describes the basic steps to create an assembly from a part using VTube-LASER and SOLIDWORKS.


STEP 1: Measure One of the Parts in VTube-LASER

Measure the first pipe and create a measured tube shape.

Vtube-laser v2.5 measure header pipe.png

STEP 2: Build the Part in SOLIDWORKS

Use the File tab in Measure Tube Data to send the measured part to SOLIDWORKS.

Vtube-laser v2.5 build solidworks.png


STEP 3: Save the SOLIDWORKS Part File

Save the part to a unique SOLIDWORKS part file on the disk.

Vtube-laser v2.5 solidworks part.png


STEP 4: Repeat Steps 1 through 3 for all the parts

Be careful to not move the assembly. Repeat the first three steps for each tube.

STEP 5: Start a New Assembly

Start a new assembly. These steps show how to insert four parts from the SOLIDWORKS part files.

Vtube-laser v2.5 solidworks new assembly.png


STEP 6: Cancel the New Assembly Feature

In order to insert the tubes in the proper location, we need to establish the common origin in a plane. So press Cancel new assembly first.

Vtube-laser v2.5 solidworks cancel new assembly.png


STEP 7: Create a Reference Plane at the Origin

Insert a new plane, then press Finish. It is not necessary to change the location of the plane - since it is already centered around the world origin.

Vtube-laser v2.5 solidworks insert a plane.png

Read More About Tube Elongation



Other Pages