Difference between revisions of "Building Tube Assemblies in SOLIDWORKS"

From ATTWiki
Jump to: navigation, search
(STEP 1: Measure One of the Parts in VTube-LASER)
(STEP 3: Save the SOLIDWORKS Part File)
Line 31: Line 31:
 
Save the part to a unique SOLIDWORKS part file on the disk.<br><br>
 
Save the part to a unique SOLIDWORKS part file on the disk.<br><br>
 
[[image:vtube-laser_v2.5_solidworks part.png|500px]]<br><br>
 
[[image:vtube-laser_v2.5_solidworks part.png|500px]]<br><br>
 +
 +
 +
==STEP 4: Repeat Steps 1 through 3 for all the parts==
 +
Be careful to not move the assembly.  Repeat the first three steps for each tube.<br><br>
  
 
==Read More About Tube Elongation==
 
==Read More About Tube Elongation==

Revision as of 18:58, 2 June 2016

Vtube-step logo 1.96.png Vtube-laser logo 1.96.png

Vtl screen hd scanner without logo.png


Vtube-laser v2.5 header to measure.png

VTube-LASER can reverse engineer tube and then build that tube in SOLIDWORKS as a fully-constrained 3D parametric model. This page describes the basic steps to create an assembly from a part using VTube-LASER and SOLIDWORKS.


STEP 1: Measure One of the Parts in VTube-LASER

Measure the first pipe and create a measured tube shape.

Vtube-laser v2.5 measure header pipe.png

STEP 2: Build the Part in SOLIDWORKS

Use the File tab in Measure Tube Data to send the measured part to SOLIDWORKS.

Vtube-laser v2.5 build solidworks.png


STEP 3: Save the SOLIDWORKS Part File

Save the part to a unique SOLIDWORKS part file on the disk.

Vtube-laser v2.5 solidworks part.png


STEP 4: Repeat Steps 1 through 3 for all the parts

Be careful to not move the assembly. Repeat the first three steps for each tube.

Read More About Tube Elongation



Other Pages