Difference between revisions of "Benderlink for SolidWorks NLM Installation"

From ATTWiki
Jump to: navigation, search
Line 4: Line 4:
 
This page addresses how to setup the Network License Manager for use with Benderlink for SolidWorks.
 
This page addresses how to setup the Network License Manager for use with Benderlink for SolidWorks.
  
<table CELLSPACING=3 CELLPADDING=10 border=1>
+
<table CELLSPACING=3 CELLPADDING=10 border=0>
 
<tr>
 
<tr>
 
<td bgcolor="#b1b2c5">Step 1</td>
 
<td bgcolor="#b1b2c5">Step 1</td>
<td bgcolor="#a4f2c8" width=300>Plug the hardware key that was shipped to you with the Dell computer into the Server.</td>
+
<td bgcolor="#b0c2e0" width=300>Plug the hardware key into the NLM SERVER computer.</td>
 
</tr>
 
</tr>
</table>
 
  
 +
<tr>
 +
<td bgcolor="#b1b2c5">Step 2</td>
 +
<td bgcolor="#b0c2e0" width=300>Install the software from the CD</td>
 +
</tr>
  
Step 2. Download and install the Network License Manager software on the server.
+
<tr>
 +
<td bgcolor="#b1b2c5">Step 3</td>
 +
<td bgcolor="#b0c2e0" width=300>Under the "Hardware Key Data" tab, verify that The "Key Type" is "memo" and that the "Key Serial Number" matches the "Licensed Key Serial Number". <br><br>
  
    You can download this software at:
+
Next, check the "Licensed Applications" tab.  "Application Name" should say "Benderlink for Solidworks" and "Max Seats" is "1".</td>
 +
</tr>
  
    http://www.advancedtubular.com/customers/spectrum/setup_att_nlm.exe
 
  
 +
<tr>
 +
<td bgcolor="#b1b2c5">Step 4</td>
 +
<td bgcolor="#b0c2e0" width=300>Install Benderlink for SolidWorks on any workstation that will run the software.</td>
 +
</tr>
  
Step 3. Once the software is downloaded an installed, run the program.
 
  
    Under the "Hardware Key Data" tab, verify that The "Key Type" is "memo" and that the "Key Serial Number" matches the "Licensed Key Serial Number".
+
<tr>
 +
<td bgcolor="#b1b2c5">Step 5</td>
 +
<td bgcolor="#b0c2e0" width=300>Once installed you'll need to edit the configuration file that is located at:<br><br>
  
     Next, check the "Licensed Applications" tab.  "Application Name" should say "Benderlink for Solidworks" and "Max Seats" is "1".
+
     C:\Program Files\blinksw\config\blinksw.config<br><br>
  
 +
    Using Notepad is the easiest way to edit this file.  To do this, right-click on "blinksw.config" and choose "Open With", then choose "Notepad" from the Menu.<br><br>
  
If for any reason something is out of place, please contact me and I'll see that it gets fixed!
+
    Once you are editing the file, look for the line that says:<br><br>
  
Step 4. Download and install Benderlink for Solidworks on the client computer.
+
    "NLM IP Address=127.0.0.1"<br><br>
  
     You can download this software at:
+
     Change this address to the IP address of the server that the NLM software is installed on.<br><br>
  
     http://www.advancedtubular.com/customers/spectrum/setup_blinksw_1_7.exe
+
     Once you have done that, you can save the file and exit Notepad.<br><br>
 +
</td>
 +
</tr>
  
  
Step 5Once installed you'll need to edit the configuration file that is located at:
+
<tr>
 +
<td bgcolor="#b1b2c5">Step 6</td>
 +
<td bgcolor="#b0c2e0" width=300>Run Benderlink for SolidworksThe NLM Server software should report that a user is logged into Benderlink for Solidworks and that there are the correct seats of the software available.
 +
<br><br>
 +
</td>
 +
</tr>
  
    C:\Program Files\blinksw\config\blinksw.config
+
</table>
 
+
    Using Notepad is the easiest way to edit this file.  To do this, right-click on "blinksw.config" and choose "Open With", then choose "Notepad" from the Menu.
+
 
+
    Once you are editing the file, look for the line that says:
+
 
+
    "NLM IP Address=127.0.0.1"
+
 
+
    Change this address to the IP address of the server that the NLM software is installed on.
+
 
+
    Once you have done that, you can save the file and exit Notepad.
+
 
+
 
+
Step 6.  Run Benderlink for Solidworks.  The NLM Server software should report that a user is logged into Benderlink for Solidworks and that there are Zero seats of the software available.
+
 
+
If for any reason something is out of place, please contact me and I'll see that it gets fixed!
+
 
+
 
+
 
+
Regards,
+
John Esralian
+
Advanced Tubular Technologies
+
(248) 674-2059
+

Revision as of 20:39, 5 March 2008

Blinkswlogo.jpg

Solidworkslogo.png

This page addresses how to setup the Network License Manager for use with Benderlink for SolidWorks.

Step 1 Plug the hardware key into the NLM SERVER computer.
Step 2 Install the software from the CD
Step 3 Under the "Hardware Key Data" tab, verify that The "Key Type" is "memo" and that the "Key Serial Number" matches the "Licensed Key Serial Number".

Next, check the "Licensed Applications" tab. "Application Name" should say "Benderlink for Solidworks" and "Max Seats" is "1".
Step 4 Install Benderlink for SolidWorks on any workstation that will run the software.
Step 5 Once installed you'll need to edit the configuration file that is located at:

   C:\Program Files\blinksw\config\blinksw.config

   Using Notepad is the easiest way to edit this file.  To do this, right-click on "blinksw.config" and choose "Open With", then choose "Notepad" from the Menu.

   Once you are editing the file, look for the line that says:

   "NLM IP Address=127.0.0.1"

   Change this address to the IP address of the server that the NLM software is installed on.

   Once you have done that, you can save the file and exit Notepad.

Step 6 Run Benderlink for Solidworks. The NLM Server software should report that a user is logged into Benderlink for Solidworks and that there are the correct seats of the software available.