Benderlink for MiiC 5.1

From ATTWiki
Revision as of 13:45, 6 October 2014 by Mcone (Talk | contribs)

Jump to: navigation, search

Blinkmiic logo.jpg Connect to MiiC Benders, edit data, send solid models, save the MiiC data to your computer.

Version 5

Release Date: October 6, 2014

Benderlink miic v5.png



Check.jpg UPDATE: VTube-STEP 1.95

Vtube-step logo.jpg

The included VTube-STEP is upgraded to version 1.95. This allows you to import solid models into MiiC benders. See VTube-STEP

Vtube-step-1.89 screenimage.png



Check.jpg FIX: Rotation Calculation in MiiC Edit Part Data

Previous versions calculated the correct rotations - but inserted them in the wrong rows in the PRB data.

This has been repaired.

Benderlink MiiC 5.1 ConvertToPRB Closeup.png

Benderlink MiiC 5.1 ConvertToPRB.png



Check.jpg Other Changes

  • New: Ping serial device servers before attempting to open COM ports at the MiiC benders

  • Fixed: Floating point conversion issues during data send are repaired.

  • Improved: Benderlink Network Menu is improved and easier to use.

  • Improved: Moved the storage of configuration data to My Documents\Benderlink for MiiC to comply with Microsoft rules about where to put configuration files.

  • New: Press Enter in the PRB grid to move to the next cell down.

Other Pages

Retrieved from "http://www.advancedtubular.wiki/index.php?title=Benderlink_for_MiiC_5.1&oldid=25652"