Benderlink for KEINS

From ATTWiki
Revision as of 15:28, 24 October 2008 by Mcone (Talk | contribs)

Jump to: navigation, search

This software is designed to communicate with Chiyoda and KEINS benders.

Blink chiyoda keins 5 82 main1.jpg

Contents


MAIN FEATURES

1 - It allows for intelligent bi-directional communications with measuring centers.

2 - It allows for true DNC offline programming. This means that you can control every setup parameter from Benderlink (Note: It is not possible to control or store the low level machine parameters using Benderlink)

3 - It allows customers to use a PC disk / network to store all Chiyoda / KEINS parts off the control. (Bypassing the floppy drive.)

LICENSE TYPES

There are four license types. Each of these license levels allow you to custom-tailor your purchase with your application.

FULL Level 1 Communicate and manage files for up to 99 benders.
FULL Level 2 Level 1 PLUS Edit bender data in Windows
FULL Level 3 Levels 1 and 2 PLUS enable CORRECTIONS LOOPS with measuring centers.
OFFLINE The Benderlink offline license allows engineers to program Benderlink from a location that are off-site or at a remote location. The only difference between the OFFLINE license and the FULL license is that the OFFLINE version of the software will not communicate with benders. Typically offline license is used to save the data files to a shared network location. The full version of Benderlink that is connected to the bender can load the files created and saved with the offline version of Benderlink.

See the PDF data sheet section below for details.




PDF DataSheets

Blinkkeins datasheet.jpg

Download a Datasheet for Benderlink for KEINS

Download a Datasheet for Benderlink Ethernet Module for KEINS

Blinkchikeins levels pdf thumb.jpg

Download a DataSheet that explains the License Levels in Benderlink for Chiyoda/KEINS.

REVISIONS

May 29, 2008Revision: Benderlink for Chiyoda/Keins 5.92
May 6, 2008Revision: Benderlink for Chiyoda/Keins 5.91
May 2, 2008Revision: Benderlink for Chiyoda/Keins 5.90
March 14, 2008Revision: Benderlink for Chiyoda/Keins 5.88
February 26, 2008Revision: Benderlink for Chiyoda/Keins 5.87
December 19, 2007Revision: Benderlink for Chiyoda/Keins 5.86
December 3, 2007Revision: Benderlink for Chiyoda/Keins 5.85
July 30, 2007Revision: Benderlink for Chiyoda/Keins 5.84
June 1, 2007Revision: Benderlink for Chiyoda/Keins 5.82
February 12, 2007Revision: Benderlink for Chiyoda/Keins 5.72
February 4, 2007Revision: Benderlink for Chiyoda/Keins 5.71b