Benderlink for Eaton Leonard

From ATTWiki
Revision as of 18:50, 18 July 2016 by Mcone (Talk | contribs)

Jump to: navigation, search

Blinkellogo.jpg
BlinkHyprexLogo.png



Features

Blinkel v4-20080909 mainscreen.jpg


Hyprex Protocol

The Benderlink for Hyprex is a modified Eaton Leonard protocol. It operates very much like Benderlink for Eaton Leonard.

Update Page

For Eaton Leonard Control Types

Benderlink understands the data structure and communications protocol of older legacy Eaton Leonard benders.

It can communicate with and edit all of the information on the Premier, the EL-2000, and the Velog controls.

El premier 001.jpgEl2000.jpgEl velog 001.jpg

Editing EL Data and Network Storage

Benderlink for EL allows operators to edit ALL the Eaton Leonard data transferred to Velog, EL-2000, and Premier controls. Hundreds of EL values have been identified and are now completely editable inside the Edit EL Data window.

An easy-to-use user interface has been designed to allow operators to easily change values for Eaton Leonard benders very quickly. Examine the user interface on the right, and you will see how simple the Eaton Leonard value structure has been made. The box on the left allows for easy access to all SETUP and EXTENDED SETUP values. The values have been grouped into logical groups for easier access.

The YBC grids on the right are separated the YBC data into four groups: Axis Data, Velocity Data, Function Data, and Stop and Last Data. Editing the data is very fast because moving to the correct variable is very fast.

Data can be sent to one of up to 100 benders, or saved on a local or network drive for backup.

Blinkel editscreen.jpg

Benderlink Ethernet Module - Adding Virtual COM Ports on a Network

Benderlink works with our Benderlink Ethernet Module to communicate through the Eaton Leonard current loop protocol.

This module is an industrial box that contains electronics that is designed to perform direct communications through specialized electronics with Eaton Leonard benders. Each Benderlink Ethernet Module comes with either WIRED ONLY or WIRELESS capability.

This module uses our Communications Board for Eaton Leonard - CB-EL1 for connection to Eaton Leonard benders.

Blink ethernet module vector benderside 600.jpg



Demonstration Videos for Benderlink for Eaton Leonard

Download and view videos that show how Benderlink for SolidWorks works.

Sw2el movie.jpg

OTHER PAGES