Difference between revisions of "Benderlink for Chiyoda"

From ATTWiki
Jump to: navigation, search
(Quick Links)
Line 21: Line 21:
 
* See [[Benderlink for Chiyoda/KEINS Revisions]] page
 
* See [[Benderlink for Chiyoda/KEINS Revisions]] page
 
* See the [[Benderlink for ChiyodaKEINS Software Maintenance Plan]]
 
* See the [[Benderlink for ChiyodaKEINS Software Maintenance Plan]]
* [[Data Conversion Rules for Benderlink for Chiyoda/KEINS]]<br><br>
+
* [[Data Conversion Rules for Benderlink for Chiyoda/KEINS]]
* [https://www.advancedtubular.com/blink_keinschiyoda/20181207%20Direct%20connection%20test%20of%20Benderlink%20with%20Chiyoda%20with%20Keyspan.htm Instructions for Direct Communications Test]
+
 
 +
== Diagnostics ==
 +
* See [https://www.advancedtubular.com/blink_keinschiyoda/20181207%20Direct%20connection%20test%20of%20Benderlink%20with%20Chiyoda%20with%20Keyspan.htm Instructions for Direct Communications Test]
  
 
== MAIN FEATURES ==
 
== MAIN FEATURES ==

Revision as of 01:58, 8 December 2018

Blink keinschiyoda orangefire.jpg
Connect measuring centers with Chiyoda and KEINS benders and store all bender data on your network using Benderlink.

Blink keinschiyoda screens 6.1 recall.jpg


Quick Links

Diagnostics

MAIN FEATURES

Feature Description
Communicate Benderlink can communicate and manage files for up to 99 benders
Edit bender data in Windows It allows for true DNC offline programming. This means that you can control every setup parameter from Benderlink


(Note: All operator accessible parameters are programmable. The low level passworded machine parameters that control the personality of the bender are not programmable by Benderlink.)

Network Part Storage It allows customers to use a PC disk / network to store all Chiyoda / KEINS parts off the control. (Bypassing the floppy drive.)
Corrections Loops Allow measuring centers to correct the bender setup



OFFLINE License

The Benderlink offline license allows engineers to program Benderlink from a location that are off-site or at a remote location. The only difference between the OFFLINE license and the FULL license is that the OFFLINE version of the software will not communicate with benders. Typically offline license is used to save the data files to a shared network location. The full version of Benderlink that is connected to the bender can load the files created and saved with the offline version of Benderlink.





DataSheets

Blinkchiyoda datasheet.jpg

Download a Datasheet for Benderlink for Chiyoda

Download a DataSheet Benderlink Ethernet Module for Chiyoda

Blink keinschiyoda capplication1.jpg

Download a customer success story

OTHER PAGES

  • About Chiyoda - See this page for control version information.