Difference between revisions of "Benderlink for BLM"

From ATTWiki
Jump to: navigation, search
(Other Pages)
(REVISIONS)
Line 68: Line 68:
 
Note: As of version 3.0 and higher, Benderlink for BLM supports the modification of the VGP format directly.  VGP is software that allows operators to program and setup the BLM benders controls.  A copy of VGP is installed on each BLM operator station.
 
Note: As of version 3.0 and higher, Benderlink for BLM supports the modification of the VGP format directly.  VGP is software that allows operators to program and setup the BLM benders controls.  A copy of VGP is installed on each BLM operator station.
 
<table>
 
<table>
 +
<tr><td>April 13, 2009</td><td>[[Revision: Benderlink for BLM 4]]</td></tr>
 
<tr><td>February 10, 2009</td><td>[[Revision: Benderlink for BLM 3.5]]</td></tr>
 
<tr><td>February 10, 2009</td><td>[[Revision: Benderlink for BLM 3.5]]</td></tr>
 
<tr><td>February 3, 2009</td><td>[[Revision: Benderlink for BLM 3.4]]</td></tr>
 
<tr><td>February 3, 2009</td><td>[[Revision: Benderlink for BLM 3.4]]</td></tr>

Revision as of 05:43, 17 April 2009

Benderlink blm logo.jpg

Blm e-bend76.jpg

This software is designed to enable communication with BLM VGP-based benders.

Blinkblm v3.5.jpg


MAIN FEATURES

1 - Allows for bi-directional communications with measuring centers for bender correction

2 - Communicates with the VGP software by reading and writing the VGP native data files

3 - Import data from Solid Modeling software like SolidWorks using Benderlink for SolidWorks.




APPLICATION Information

FARO Arm and BLM Benders
Blinkfaroblm datasheet image.jpg

Download an applications datasheet for the FARO Arm and BLM Benders.

Eaton Leonard Vector Tube Data Center and BLM Benders
Blinkblm vector datasheet image.jpg

Download an applications datasheet for the Eaton Leonard Vector Tube Data Center and BLM Benders.

See also Vector Tube Data Center

REVISIONS

Note: As of version 3.0 and higher, Benderlink for BLM supports the modification of the VGP format directly. VGP is software that allows operators to program and setup the BLM benders controls. A copy of VGP is installed on each BLM operator station.

April 13, 2009Revision: Benderlink for BLM 4
February 10, 2009Revision: Benderlink for BLM 3.5
February 3, 2009Revision: Benderlink for BLM 3.4
December 7, 2007Revision: Benderlink for BLM 3.2
December 6, 2007Revision: Benderlink for BLM 3.1
October, 2007Revision: Benderlink for BLM 3



Demonstration Video for Benderlink for BLM

Download and view videos that show how Benderlink for BLM works.


Blinkblm video.jpg
Introductory Demonstration Video
This video demonstrates how to transfer SolidWorks data to a BLM VGP-3D control.


Other Pages