AICON

From ATTWiki
Revision as of 21:07, 7 December 2009 by Mcone (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Aiconlogo.jpg Tubeinspectlogo.jpg

The AICON TubeInspect system is a vision-based tube measuring system used to setup, correct, and verify tube part shapes.

Aicon system.jpg

The Advanced Tubular Technologies Benderlink for Eaton Leonard [1] can use AICON data to correct Eaton Leonard benders using the legacy EL Current Loop protocol.



Connecting AICON to an Eaton Leonard Bender

See AICON to Eaton Leonard Bender for a diagram for connection between an AICON and Eaton Leonard benders using our Benderlink for Eaton Leonard software and Benderlink Ethernet Modules.

Aicon to eatonleonard diagram.jpg



Retrieved from "http://www.advancedtubular.wiki/index.php?title=AICON&oldid=12746"