Difference between revisions of "20190625 HEXAGON Arm - Could not scan a tube and get good results"
From ATTWiki
(Created page with "Back to VTube-LASER ==CUSTOMER ARM MODEL== *HEXAGON Arm *Model 7325 ==OPERATOR ISSUE== Scanning was poor and failed often. ==OUR DISCOVERY== *MANUAL scanning exposure w...") |
(→OUR DISCOVERY) |
||
Line 9: | Line 9: | ||
==OUR DISCOVERY== | ==OUR DISCOVERY== | ||
− | * | + | *The exposure mode was set to MANUAL inside RDS. |
− | + | ||
==OTHER ACTIONS== | ==OTHER ACTIONS== |
Latest revision as of 15:29, 27 June 2019
Back to VTube-LASER
Contents |
CUSTOMER ARM MODEL
- HEXAGON Arm
- Model 7325
OPERATOR ISSUE
Scanning was poor and failed often.
OUR DISCOVERY
- The exposure mode was set to MANUAL inside RDS.
OTHER ACTIONS
- The customer changed the exposure mode to Automatic.
RESULT
The system measured perfectly.