Difference between revisions of "20190426 HEXAGON Arm - Slow Scanning - We Found Incorrect Scanning Profile"
From ATTWiki
| Line 9: | Line 9: | ||
==OUR DISCOVERY== | ==OUR DISCOVERY== | ||
| − | + | *The wrong scanning profile was being used in RDS. | |
| − | + | ||
| + | *The Point Sampling was set to 100% - which is way too dense for VTube-LASER. | ||
==OTHER ACTIONS== | ==OTHER ACTIONS== | ||
| − | + | *We opened RDS and checked the current Scanning Profile. | |
| − | + | ||
| + | *We set the scan settings point sampling to 25%. | ||
| + | |||
[[image:vtl_2.9.19_proper_rds_setup.png|500px]] | [[image:vtl_2.9.19_proper_rds_setup.png|500px]] | ||
| − | + | *We made sure that this was associated with and saved to a new profile named "VTube". | |
| − | + | ||
| + | *We set the active profile to VTube. | ||
| + | |||
| + | |||
[[image:vtl_2.9.19_rds_floating_window_vtube.png|500px]] | [[image:vtl_2.9.19_rds_floating_window_vtube.png|500px]] | ||
Revision as of 20:28, 26 April 2019
Back to VTube-LASER
Contents |
CUSTOMER ARM MODEL
- HEXAGON Arm
- Model RA8325
OPERATOR ISSUE
Scanning was sluggish.
OUR DISCOVERY
- The wrong scanning profile was being used in RDS.
- The Point Sampling was set to 100% - which is way too dense for VTube-LASER.
OTHER ACTIONS
- We opened RDS and checked the current Scanning Profile.
- We set the scan settings point sampling to 25%.
- We made sure that this was associated with and saved to a new profile named "VTube".
- We set the active profile to VTube.
RESULT
VTube-LASER measures quickly and perfectly
