Chiyoda Communications with VTube

Which files are used to create parts in the Chiyoda?

The files used are .CHS files.

STEP 1 Create a template in the Chiyoda with the number of bends the new part will have.
STEP 2 Save the template created on the Chiyoda onto a thumb drive and bring it to the VTube-STEP computer.
STEP 3 Load in the desired part into VTube-STEP (must match the bend count on the template created in the bender)
STEP 4 In VTube-STEP under the Import/Export tab > Export > load Chiyoda Ex File - CHS

STEP 5 Choose the template file from the thumb drive and load it into VTube.
STEP 6 Press the Export to Chiyoda EX Data File button and choose the thumb drive from a persistent path or press Continue with no Selection and find the thumb drive on the computer.
STEP 7 Save the .CHS file to the same thumb drive, remove it and take it back to the bender
STEP 8 Load the file in the bender and bend the part. Make sure to double check the data in VTube-STEP matches the data in the bender.