Importing a .STP File
From ATTWiki
|
This document shows the process of importing a STEP file into VTube-STEP
The files used are .stp files.
Steps to import a .stp file into VTube-STEP
STEP 1Make sure VTube-STEP is cleared. |
|
STEP 2Under Import/Export, import a STEP File-STP. |
|
STEP 3Load the desired part into VTube-STEP from the file it is saved in inside file explorer |
|
STEP 4In VTube-STEP under the Import/Export tab > Export > load Chiyoda Ex File - CHS |
STEP 5Choose the template file from the thumb drive and load it into VTube. |
|
STEP 6Press the Export to Chiyoda EX Data File button and choose the thumb drive from a persistent path or press Continue with no Selection and find the thumb drive on the computer. |
|
STEP 7Save the .CHS file to the same thumb drive, remove it and take it back to the bender |
|
STEP 8Load the file in the bender and bend the part. Make sure to double check the data in VTube-STEP matches the data in the bender. |
Other Pages
- Back to the VTube-STEP page