Copy a default VTube configuration to another computer with VTube

From ATTWiki
Revision as of 01:13, 20 November 2020 by Mcone (Talk | contribs)

Jump to: navigation, search

Vtube-step logo 1.96.png Vtube-laser logo 1.96.png

VTS2 SplashScreen.png
Vtl screen hd scanner without logo.png



Gear warning.jpg WARNING

The source and target computers should have the same VTube version before following this steps.


* It is safe to copy a configuration from a source VTube computer to a target VTube computer as long as the program versions and build numbers on both computers are identical.

  • If the two are not compatible, then the VTube target computer may not be able use the new configuration files.
  • Click in the top toolbar Information button to check the current version for both VTubes before you copy a configuration.


Steps to copying a default setup

STEP 1

Use the toolbar button to clear VTube.

Vtube toolbar clear.png

STEP 2

Change the values in VTube to whatever you want them be when you perform a project clear in the future.

Be sure that no tube data exits in this state, or VTube will clear the data to preset values with a tube. (Of course, you can do this, if you really intend to do it.)

Vtube-step v2.2 cleared.png

STEP 3

Press the System Options button.

Vtube-STEP v2.2 toolbar sys.png

STEP 4

Press the Project Setup tab, and then press the Set Project Default State button.

Vtube v2.2 projecttab saveprojectdefault.png

STEP 5

Exit the System Options menu. VTube will now clear to your new default settings when you clear VTube projects.

Vtube v2.2 systemoptions closemenu.png


Other Pages