Enhancements Information
- Now ALL data found in an FIF file is converted to the Supravision format.
- Distance data can be automatically converted to the other unit (Millimeters to Inches, or Inches to Millimeters).
- Improved error handling.
- This version retains both the XYZ and YBC data intact. There is no forced conversion in one direction or another between the two data types.
Data Included In Conversion
|
XYZ DATA
|
- NEW - Properly skip REFERENCE points in the XYZ data. (Reference points are not intersection or end points. They are not used to define the shape of the tube.)
- NEW - Retain XYZ data as it exists in the FIF file. No longer attempt a recalc from YBC to XYZ. This allows measuring centers to be sure to retain original XYZ MASTER data during conversion.
|
|
YBC DATA
|
- NEW - Retain YBC data as it exists in the FIF file. No longer attempt a recalc from XYZ to YBC. This allows measuring centers to retain original YBC bender setup data during conversion.
|
|
VELOCITY DATA
|
- NEW - Conversion of YBC axes speeds: 1 - 8
|
|
FUNCTION DATA
|
- NEW - Conversion of all YBC FUNCTION Bits (12345678)
|
|
SPECIAL FUNCTION DATA
|
- NEW - Conversion of all YBC FUNCTION STOP and LAST Bits
|
|
PROCESS DATA
|
NEW VALUES CONVERTED:
- Default Radius
- End A Diameter
- End B Diameter
(Diameter was already converted)
|
|
TOOL DATA
|
Handles Up to 9 Radius Levels for:
- NEW - Radius
- NEW - Fixed Springback
- NEW - Proportional Springback
- NEW - Clamp Length
- NEW - Clearance Feed
- NEW - Clearance Angle
|
|
NEW MACHINE DATA from EL Setup Data
|
- Ymin
- Interference Zone 1
- Interference Zone 2
- Load Position
- Load Offset
- Y Position Tolerance
- Pressure Die Open Code
- Boost Delay
|
|
NEW MACHINE DATA from EL Extended Setup Data
|
- Any number of EXTENDED setup values are automatically converted
- Older benders (like Velog, EL-2000, and Premier) contain 40 extended setup values
- Newer benders can contain more
- FIF Translator takes in up to 99 extended values for conversion.
|
Automatic Conversion of Units
The following values can be automatically converted to Inches or Millimeters during conversion:
