VTube-STEP v1.85

From ATTWiki
Revision as of 14:23, 20 December 2013 by Mcone (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Vtube-step logo.jpg

Revision 1.85

Vtube-step-1.84 buildsolidworks.png




Check.jpg ENHANCED: SolidWorks Builder

The SolidWorks tube builder can now:

  • Build extruded diameter offsets at the ends of the tube.

Vtube-step-1.84.1 buildsolidworks negativeoffset.png


Vtube-step-1.84.1 PreSolidWorksPart.png

Vtube-step-1.84.1 buildsolidworks positiveoffset.png




Check.jpg Other Changes

  • The previous version of VTube-STEP does not convert the CSM M4 Y values into the proper linear unit. This version fixes that problem.

  • Several memory leak issues were repaired. VTube no longer takes memory without giving it back when finished.



Other