VTube-STEP v1.82.1
Revision 1.82.1
|
- See VTube-STEP Customer Support Page to download the latest version.
NEW: Side Menus Are Collapsible and Expandable
The side menus can be collapsed and expanded very quickly in order to show you an expanded viewport. |
NEW: Side Menu Font Size Adjustable
The side menu fonts can be changed in System Options to fit more or less on the screen vertically. |
NEW: Side Menu Width Sizing
The side menu widths can be set to default to NARROW, MEDIUM, or WIDE in the System Option menu. |
NEW: Function Key Shortcuts
VTube now uses shortcut function keys for certain tasks:
|
ENHANCED: Redesigned Control Side Menu (Right Side)
VTube needed more controls on the right. And the controls needed to be more logically grouped. Now the control menu has an added Office style button at the top called "Control" that contains 8 buttons rather than the old menu's 3 buttons. Some of the buttons were moved out of View into Control. A new important button is "Clear Imported". This button will allow you to clear all the imported data from the screen, and all collected data that depends the imported data with one touch of a button. This allows you to clear out unnecessary data that may slow VTube down. (The old method of selecting the imported objects with the window, then pressing delete several times in the Imported Model menu was too cumbersome.) |
FIX: Supravision Export of End Offsets
The Supravision export would use the A-End and B-End Solid Model Offset for the Supravision end offsets in the exported Supravision file. The values that should be used are the A-End and B-End Length Adjust - because that is the equivalent for Supravision end offsets. |
FIXED: Point Label Draw "1" Repeat
The point labels would sometimes put "1" in points other than the first point incorrectly in LASER mode. This has been fixed. |
ENHANCED: Model Refresh Graphics Optimized
The model refresh time is optimized significantly - especially when the point labels are switched on. |
Other Changes
|
Other
- Back to VTube-STEP
- Back to VTube Software Updates (for LASER Mode)
- Back to VTube-LASER