VTube Communication with YLM Benders

From ATTWiki
Revision as of 17:48, 26 June 2013 by Mcone (Talk | contribs)

Jump to: navigation, search
YLM (Yin Lin Machine Industrial Co.) benders are built in Taiwan and distributed in the Americas by J & S Machine, Inc.

YLMlogo.jpg
YLMcncbender.jpg

Contents

YLM Control software

The YLM Windows software allows for complete programming of bender setup. It includes a bender simulator.

YLMsimulator.jpg

VTube-STEP and VTube-LASER Support for YLM Benders

VTube-STEP can export Supravision data to YLM benders.

VTube-LASER, the version of VTube that connects to a FARO measuring center arm, can send measured data to the YLM control for corrections.

The connection the bender is made with standard network connection.

The YLM uniquely takes in VTube measured Supravision LRA data. To make a correction to a YLM bender, it is important to send only this data. The standard correction process will not work with the YLM.

[image:VTube-Laser-SaveMeasuredTubeData.jpg|300px]]

YLM Main Screen.jpg YLM Import Screen.jpg

Contact Information

J & S Machine, Inc.
W6009 490th Avenue
Ellsworth, WI 54011
Phone: (715) 273-3376
Phone: (877) 273-3332
Email: [email protected]

Other Pages

Retrieved from "http://www.advancedtubular.wiki/index.php?title=VTube_Communication_with_YLM_Benders&oldid=22112"