Modicon Momentum

From ATTWiki
Revision as of 12:26, 23 December 2009 by Mcone (Talk | contribs)

Jump to: navigation, search

Tsxmomentum ethernet communications adapter1.jpg

This the form of the modules that are installed to machines that use our CNC Bender software. The different modules come in a variety of functions - but the same packaging. For example, the image above shows an INPUT base with 32-points with an Ethernet Communications Adapter clipped on the top.

See this data sheet (16 pages) for an overview of these modules.

View the Modicon Momentum I/O Base User Guide (662 pages).

They mount to DIN rails in electrical panels.

This is the form for the I2T servo modules

Momentum.jpg

In the I2T servo modules, the serial port is an RJ-45 receptacle port shown in this image.

Momentum serial port.jpg


INPUT Base with Ethernet Communication Adapter

This is an Ethernet Communications Adapter on top of a 32-point INPUT base.

Tsxmomentum ethernet communications adapter2.jpg

BACK of Modicon Momentum I/O Base

This is the back of the base.

Tsxmomentum back.jpg

Other Pages