Measuring Center Accessories

From ATTWiki
Revision as of 20:38, 8 June 2012 by Mcone (Talk | contribs)

Jump to: navigation, search

Vtube-laser logo.jpg Measuring Center Tables

Vtube-laser 1 73.jpg


Newport Integrity 1 VCS, 4 ft. width, 6 ft. length, 6 in. thick, Rigid

This table is highly recommended.

This table was installed for a customer that asked for a turnkey solution. The table is 6" thick. (The other model is 12" thick.) The customer determined that the 6" thick table was better because the final height was 6" lower.

The table top height is 34".

Part Number: INT1-46-6-N

Web site: www.newport.com
Newport inegrity.jpg


FARO Magnetic Base

This magnetic base works well on the Newport table.

It is expensive - but it is also very high quality and heavy.

Accssories Document (PDF)
Faro magnetic base.jpg


Dell T3500 Desktop

This is one of the fastest computers we have run with the FARO and VTube-LASER.

It was installed as part of a turnkey system at a customers - and we are very impressed. Here are the specs:

Dell Precision T3500 Minitower Workstation, Intel XEON 3500, Windows 7 Pro, 64 bit, 500 GB hard drive, 12 GB memory Dell T3500.jpg

Dell 24" Flat Panel Monitor

We recommend a 24" flat panel as the minimum size for measuring center monitors. Dell 24inchFlatPanel.jpg

Other Pages