I2T HMI Software

From ATTWiki
Revision as of 21:45, 29 June 2006 by Mcone (Talk | contribs)

Jump to: navigation, search

I2T HMI Software is used for low level setup of I2T control modules. The version you can download from this site is I2T Module Setup Software Ver 4.4

http://www.advancedtubular.com/cncbender/images/i2tmoduleinterfacejpg.jpg

[1] (Download the software here.)


Important note: Great care must be taken when operating a bender with this software. It has nearly no built-in safety features to protect from crashes.

-Michael Cone --Mcone 17:45, 29 June 2006 (EDT)

Retrieved from "http://www.advancedtubular.wiki/index.php?title=I2T_HMI_Software&oldid=1572"