VTube-LASER-Compatible HEXAGON Scanners and Arms

HEXAGON Arms

Arm Type	Image
ROMER Arm Version 7 Series 7-axis laser scanner
HEXAGON Arm Version RA8 Series 7-axis laser scanner
ROMER Arm Version 7 Series 6-axis ball probe
HEXAGON Arm Version RA8 Series 6-axis ball probe

According to HEXAGON, VTube-LASER can support any scanner supported by RDS directly, including...

The AS1 scanner is for the RA8 7-axis arms. It is the upgraded version of the RS6. It is very good for parts that are highly reflective or change reflectivity on different parts of the surface. The SHINE technology takes three different exposures of each laser stripe in order to properly take in data from surfaces that have different reflectivity along the stripe.
The RS6 scanner is for the RA8 7-axis arms. It is very good for parts that are highly reflective or change reflectivity on different parts of the surface. The SHINE technology takes three different exposures of each laser stripe in order to properly take in data from surfaces that have different reflectivity along the stripe.
This is for RA8 7-axis Portable Arms. It is best for parts that have consistent surface reflectivity properties along the entire part because the camera chooses a single exposure for each stripe.
RA7 7-axis Portable Arms

HP-L-20.8 RA7 and RA8 Portable Arms with HP-L-8.9 scanners This scanner is for attachment of a scanner on the same arms that use Tube Shaper software. See the ROMER HP-L-8.9 website For use on 6 axis arms.
Leica Absolute Scanner for Long Distances The LR model can measure a 10 meter volume. The MR model can measure a 20 meter volume. YouTube video of LAS

All ball probe systems on devices that run through RDS are compatible with VTube-LASER.