Software License Program ID List
From ATTWiki
- This is a list of Program IDs for Advanced Tubular licenses. When you run KeyCheck with a PERMANENT hardware key, you should see at least one of these ID values in the list.
| PID Value | Program Licensed | ||
|---|---|---|---|
| 301 | TubeCalc | ||
| 302 | Bender to XYZ Calculator - v4 for use in Benderlink for Chiyoda and KEINS | ||
| 303 | Overbend Calculator | ||
| 304 | Sumitube Calculator | ||
| 305 | FIF Translator (obsolete) | ||
| 306 | Benderlink for Keins/Chiyoda | ||
| 307 | Benderlink for Flexbender | ||
| 308 | Benderlink for Keins/Chiyoda Offline Programmer | ||
| 309 | Benderlink for U.T.E. | ||
| 310 | XYZ to Bender Calculator for U.T.E. | ||
| 311 | Graphics Module for U.T.E. | ||
| 312 | Benderlink for Trumpf-Pulzer | ||
| 313 | Benderlink for Eagle P2 | ||
| 314 | Benderlink for Eaton Leonard | ||
| 315 | CNC Bender ProControl | ||
| 316 | Benderlink for CNC Bender | ||
| 317 | CNC Bender ProControl Offline | ||
| 318 | Benderlink for Keins/Chiyoda Diagnostic | ||
| 319 | Benderlink for Addison MK5 to Supravision | ||
| 320 | TubeCAD Pro | ||
| 321 | Benderlink for Pines/Laservision | ||
| 322 | TubeCalc 3 | ||
| 323 | AutoCAD DXF to Bender | ||
| 324 | Benderlink for Supravision | ||
| 325 | Benderlink for Crown | ||
| 326 | Benderlink for MiiC | ||
| 327 | Benderlink for MK3 to Vector | ||
| 328 | Benderlink for Ped - Data Transfer Module | ||
| 329 | Benderlink for Ped - Data Transfer Management Module | ||
| 330 | Benderlink for Addison MK5 to Vector | ||
| 331 | Network License Manager | ||
| 332 | Unassigned | ||
| 333 | Benderlink for BLM VGP | ||
| 334 | Benderlink for Keins/Chiyoda v5 | ||
| 335 | Benderlink for Keins/Chiyoda v5 - Offline | ||
| 336 | Solid Edge 2 Bender Converter | ||
| 337 | TubeCAD Lite for Clark Fixture Modular Gauges | ||
| 338 | Benderlink for SolidWorks | ||
| 339 | CNC Bender LiteControl | ||
| 340 | CNC Bender LiteControl Offline | ||
| 341 | DOD List Editor | ||
| 342 | Autodesk Inventor to Bender | ||
| 343 | Benderlink for AMCS (Adaptive Motion) | ||
| 344 | Benderlink for Faro | ||
| 345 | FIF Translator 4.1 - Extended Supravision Conversion and Output | ||
| 346 | Benderlink for MiiC DRMIII-15 Robotic Bender | ||
| 347 | Reserved | ||
| 348 | Benderlink for Chiyoda and KEINS - v5 | ||
| 349 | Bender to XYZ - Version 5 - For calculating centerline XYZ data from Bender data. | ||
| 350 | Benderlink for YSE - For linking YSE Controls to Vector Tube Measuring Centers | ||
| 351 | TubeCAD Pro v8-20100204 (32/64 bit) | ||
| 352 | CNC Bender ProControl Push Bend Option | ||
| 353 | CNC Bender ProControl PDA RVG Option | ||
| 354 | VTube-STEP | ||
| 355 | VTube-PRO | ||
| 356 | VTube-LASER | ||
| 357 | CNC Bender ProControl - v12-20100407 | 358 | CNC Bender LiteControl - v12-20100407 |
