Difference between revisions of "Revision: Benderlink for Chiyoda/Keins 5.85"

Revision as of 17:12, 5 December 2007

New Drawing Number & Filename Synchronization

Benderlink now asks if the internal drawing number should be reset to be equal to the channel filename.

Read the details below.

HOW IT WORKS

Description	This is an example that starts with an INTERNAL drawing number of kb889543, and is given a new name of Rename12345678 during the SAVE process. See in STEP 5 how Benderlink handles the difference in internal and external names.
STEP 1 Press the File Data button in the main menu
STEP 2 Choose Save Data to File for a single channel
STEP 3 Type a new filename for this channel data by press the Type Name button.
STEP 4 Change the new filename on the keyboard
STEP 5 Press SAVE
STEP 6 Select the DATA SOURCE then press the CONTINUE button	In this example, we are choosing from "Memory" - which only saves the data currently in memory without refreshing the data from the bender first.
STEP 7 Benderlink senses that the drawing number and filename do not match. Select YES, NO, or CANCEL	YES: Select YES to synchronize the internal drawing number with the filename before saving the channel (part) file NO: Select NO to skip synchronization CANCEL: Select CANCEL to stop the save process entirely
STEP 8 We selected YES, so the FILE SAVE is complete after resetting the drawing number. Now press the button labeled "PREVIOUS"
STEP 9 See in the main menu "Bender Data in Memory" log that the internal drawing number name has changed with the file save