Difference between revisions of "Inspection Tolerances"

From ATTWiki
Jump to: navigation, search
(Created page with "<table> <tr cellpadding=10> <td width=225> 200px 200px * Back to VTube-STEP * Back to [[VTube-LASER]...")

Revision as of 13:58, 20 July 2022

Vtube-step logo 1.96.png Vtube-laser logo 1.96.png

VTS2 SplashScreen.png
Vtl screen hd scanner without logo.png



Steps to changing the default setup

STEP 1

Use the toolbar button to clear VTube.

Vtube toolbar clear project.png

STEP 2

Change the values in VTube to whatever you want them be when you perform a project clear in the future.

Be sure that no tube data exits in this state, or VTube will clear the data to preset values with a tube. (Of course, you can do this, if you really intend to do it.)

Vtube-step v2.2 cleared1.png

STEP 3

Press the System Options button.

Vtube-STEP v3.2 toolbar sys.png

STEP 4

Press the Project Setup tab, and then press the Set Project Default State from the CURRENT state button.

Vtube v3.2 projecttab saveprojectdefault.png

STEP 5

Exit the System Options menu. VTube will now clear to your new default settings when you clear VTube projects.

Vtube v3.2 systemoptions closemenu.png


Other Pages