Difference between revisions of "ROMER Certified Length Bar"

From ATTWiki
Jump to: navigation, search
(Created page with " <table width= 600> <tr cellpadding=10> <td width=200> <h3>ROMER Certified Length Bar</h3> <br><br> * Back to VTube-LASER </td> <td width=700> image:ROMER_Scanner_Plus_...")

Revision as of 23:28, 15 January 2018

Contents

ROMER Certified Length Bar



ROMER Scanner Plus Hex Logo.png



Recommended - But Not Standard

Certified length bars are good for verifying that your arm is working properly.

The standard length bars use the 15mm calibration probe in one of three sockets.

There are three lengths available:

  1. 305 mm
  2. 711 mm
  3. 1000 mm



The 15 mm probe in the kit is used to calibrate your specific arm, so it's a good idea to only use it to verify the calibration of your arm and not use it for measurements.

HEXAGON recommends that you purchase a second 15 mm ball probe if you like to use it to measure regularly.

ROMERProbesStandardKit.png


TKJ Connector

ROMER Absolute Arms utilize a CMM-style kinematic joint, or TKJ type connector.

TKJ connectors allow the probes to be detached and reconnected without calibration regularly.

ROMERTKJConnector.png

HEXAGON ACCESSORIES SITE

You can purchase new probes at the HEXAGON site.

Other Pages