Difference between revisions of "VTube-LASER v1.82.1"

Revision 1.82.1

• Back to VTube-STEP
• Back to VTube Software Updates (for LASER Mode)
• Back to VTube-LASER

The right menu is completely redesigned to allow for resizing with different font sizes. The buttons are now grid-based - which allows them to redize quickly based on the font sizes.

The side panels in both STEP and LASER modes are collapsible.

To expand the menus, simply move the mouse over the collapsed side bars.

Bender Setup now shows the most recent event times for the project in memory.

This includes the time of the most recent recall from the bender, the time of the most recent send to the bender, and the time of the most recent adjustment data calculation.



This date/time data is stored with the project file. Each project will have different communications times. The date/times are loaded with the project files.

VTube shows "[Waiting for first RECALL]" or "[Waiting for first SEND]" before communications occurs the first time for a project.

• Comments are no longer displayed in a dialog at project load time.
• The envelope colors now display properly in the Inspection / Envelope menu immediately after they are set.