Difference between revisions of "Restart the HASP Service"
From ATTWiki
| Line 5: | Line 5: | ||
* Reboot the computer. | * Reboot the computer. | ||
* From a command box, type "haspdinst -kp -i" and press Enter. This will "kill process" and "install" the driver again. | * From a command box, type "haspdinst -kp -i" and press Enter. This will "kill process" and "install" the driver again. | ||
| + | |||
| + | |||
| + | ==Other== | ||
| + | *Back to "Hardware key" | ||
Revision as of 18:00, 25 January 2011
Using the hasp command-line interface, you can run haspdinst.exe to stop and reinstall the hasp driver:
- Remove the HASP hardware key(s) from the USB port(s) on the computer.
- From a command box, type "haspdinst -fr -kp -purge", and press Enter. This will "force remove", "kill process", and "purge" the process from memory.
- Reboot the computer.
- From a command box, type "haspdinst -kp -i" and press Enter. This will "kill process" and "install" the driver again.
Other
- Back to "Hardware key"
