Difference between revisions of "Jog Motion"

Revision as of 19:57, 18 January 2010

A Jog Motion is a motion for a single axis or actuator that is stored in a Custom Command for use by Teach Mode if you choose to teach the bender.

Multiple Jog Motions can be stored in a single Custom Command. When they are combined in a single Custom Command, then CNC Processor runs them all at the same time.

The existence of Jog Motions are completely configurable. You can add your own Jog Motions or remove the existing Jog Motions from the user interface using a single configuration file.

Screen 1: Select one of the Edit Custom buttons a bend in the FRB page

Screen 2: Custom Commands List Selection

Screen 3: Custom Command Editor

@@ Line 2: / Line 2: @@
 <tr valign=top>
 <td width=300>
-* A Jog Motion is a motion for a single axis or actuator that is stored in a [[Custom Command]] for use in [[Teach Mode]]<br><br>
+* A Jog Motion is a motion for a single axis or actuator that is stored in a [[Custom Command]] for use by [[Teach Mode]] if you choose to teach the bender.<br><br>
 * Jog Motions can be entered using a keyboard, or entered using [[Teach Mode]]<br><br>