Difference between revisions of "AutoBuild"

From ATTWiki
Jump to: navigation, search
Line 2: Line 2:
 
[[image:Operatorstation_model.jpg|right]]
 
[[image:Operatorstation_model.jpg|right]]
 
<br>
 
<br>
 +
<table>
 +
<tr>
 +
<td width=300>
 +
AutoBuild will convert the current bender setup into a list of commands for the [[CNC Processor] called a [[processlist]].
 +
</td>
 +
<td>
 
[[image:autobuild.jpg|400px]]
 
[[image:autobuild.jpg|400px]]
 +
</td>
 +
</td>
 +
</table>
  
−
 
+
This is the middle of a sample [[processlist]]:<br><br>
−
AutoBuild will convert the current bender setup into a list of commands for the [[CNC Processor] called a [[processlist]].  <br>
+
−
<br>This is the middle of a sample [[processlist]]:<br><br>
+
  
 
<font size=1><pre>
 
<font size=1><pre>

Revision as of 23:05, 30 December 2009

Cncbender logo.jpg

Operatorstation model.jpg


</td> </table> This is the middle of a sample processlist:

[DISPLAY] Next Step: (FRB Row 1) Close Pressure Die And Clamp, Home Boost Dies
AllDiesClose = cto:6000
[DISPLAY] Completed: (FRB Row 1) Close Pressure Die And Clamp, Home Boost Dies

[DISPLAY] Next Step: (FRB Row 1) Set Clamp Pressure To 0 %
SetClampPressure = pwr0:0.00000000, cto:6000
[DISPLAY] Completed: (FRB Row 1) Set Clamp Pressure To 0 %

[DISPLAY] Next Step: (FRB Row 1) Set PD Pressure To 0 %
SetPDPressure = pwr0:0.00000000, cto:6000
[DISPLAY] Completed: (FRB Row 1) Set PD Pressure To 0 %

[DISPLAY] Next Step: (FRB Row 1) Set Torque On Feed Axis To 15 %
SetTorqueFeed = tqe0:15
[DISPLAY] Completed: (FRB Row 1) Set Torque On Feed Axis To 15 %

[DISPLAY] Next Step: (FRB Row 1) Move Feed Axis +47.8779 MM Relative, and Move Bend Axis +90.0000 DEG Relative With Bottom Boost
FeedBendBoost1 = pos2:47.87787204, vel2:35.09566238, ump2:1, adp2:3, pos3:90.00000000, vel3:63.33333333, ump3:1, cto:60000
[DISPLAY] Completed: (FRB Row 1) Move Feed Axis +47.8779 MM Relative, and Move Bend Axis +90.0000 DEG Relative With Bottom Boost

[DISPLAY] Next Step: (FRB Row 1) Set Torque On Feed Axis To 90 %
SetTorqueFeed = tqe0:90
[DISPLAY] Completed: (FRB Row 1) Set Torque On Feed Axis To 90 %

[DISPLAY] Next Step: (FRB Row 1) Retract Mandrel
MandrelRetract = cto:6000
[DISPLAY] Completed: (FRB Row 1) Retract Mandrel
Retrieved from "http://www.advancedtubular.wiki/index.php?title=AutoBuild&oldid=13075"

AutoBuild will convert the current bender setup into a list of commands for the [[CNC Processor] called a processlist.

Autobuild.jpg