Difference between revisions of "VTube-LASER- Measuring Long Tubes"
From ATTWiki
Line 17: | Line 17: | ||
<tr valign=top> | <tr valign=top> | ||
<td width=400 > | <td width=400 > | ||
− | * When measuring long tubes, it may not be possible to reach the full tube without moving the arm or tube. The steps below show the process of measuring and moving a tube to produce measured data. This process is not as accurate as using Leapfrog but can still be used to measure long tubes.<br><br> | + | * When measuring long tubes, it may not be possible to reach the full tube without moving the arm or tube. The steps below show the process of measuring and moving a tube to produce measured data. This process is not as accurate as using [http://www.advancedtubular.wiki/index.php/VTube-LASER_Leapfrog#Leapfrog_Kit_-_Magnetic_or_Plate Leapfrog] but can still be used to measure long tubes.<br><br> |
* Any number of moves can be combined to measure any distance.<br><br> | * Any number of moves can be combined to measure any distance.<br><br> | ||
</td> | </td> |
Revision as of 15:28, 16 February 2023
|
Moving the Tube for longer Parts
|
Start a Tube Measurement
Begin measuring the tube. Once the arm can no longer reach the next straight, press the Move button in the guide box. This move function appears after measuring at least 3 straights. |
Moving the Tube
|
Leapfrog Kit - Magnetic or Plate
This is the magnetic leapfrog kit that we offer on our store. Each magnet has a conical seat attached to a magnet that can be placed anywhere for leapfrogging | |
These are the leapfrog plates that we offer on our store. The plates have three numbered conical seats or spheres. With the conical seats the ball probe needs to be used and with the spheres, the laser can be used.
|
Other Pages
- Back to VTube-LASER
- See also Calibration-Leapfrog-Move Targets
- Purchase the targets at the store.