Difference between revisions of "Premier"

From ATTWiki
Jump to: navigation, search
Line 8: Line 8:
 
<br><br>
 
<br><br>
  
* See [[See the [[VTube-LASER to Eaton Leonard Premier Communications Tutorial]] for information on how the connection works.<br><br>
+
* See the [[VTube-LASER to Eaton Leonard Premier Communications Tutorial]] for information on how the connection works.<br><br>
 
* See [[Benderlink Ethernet Module]] for information on the electronics module used for connection.<br><br>
 
* See [[Benderlink Ethernet Module]] for information on the electronics module used for connection.<br><br>
  

Revision as of 16:24, 2 December 2016

The Premier is a well-known bender control designed by Eaton Leonard. Every Premier control has communications capabilities embedded and switched on.

The image on the right shows an Eaton Leonard bender control. It is a DOS-based computer in a Rittal enclosure. In the 1990s and on, this is probably the most prolific control in the world:

This control uses an electronic communications protocol that Eaton Leonard refers to as "Current Loop". VTube-LASER measuring center software can communicate with Premier controls using current loop electronics inside a Benderlink Ethernet Module.

Elpremier bender communications.png
El premier 001.jpg