Difference between revisions of "VTube-STEP v1.93"

Revision 1.93

• Back to VTube-STEP
• Back to VTube-STEP Revisions
• Back to VTube Software Updates (for LASER Mode)
• Back to VTube-LASER

VTube-STEP can now import CSM M3 bender files.

• Import the centerline XYZ data.
• Or import the YBC data.
  
  

• Other values imported are:
  • Diameter
  • Wall Thickness
  • Pre Length (Start Length)
  • End Length
  • Cut Length
  • Pipe Material Note

The End A and End B diameters were only in VTube-LASER. Now they are in VTube-STEP in order to allow users to control the data when outputting data to a Supravision file in VTube-STEP.

The two values are placed immediately after the Diameter field.

Some output formats prefer to have a default tolerance built into the export, so now the Default Tolerance value is included in the VTube-STEP Part Setup menu.

The end diameters are now set to equal the main diameter during centerline calculation from models.

The pop up menus for the Part Setup menu (STEP and LASER modes) now allow for the end diameters to be synchronized with the main diameter.

The Eaton Leonard Laservision measuring center can import CSV (Comma Separated Value) files built in an Excel spreadsheet. This version of VTube can now export to this format. This version fine-tunes the new feature to make the output conform to customer specifications for the project.

The Quick Open dialog now has a pull-down list that shows all the recent previous paths used to load VTube project files or imported solid model files.

Click on the previous path to use, and the folder tree on the left will open the new folder.

• Updated the Chinese translation.
• Updated the German translation.