Difference between revisions of "TubeCAD Pro v8-20071024"
From ATTWiki
| Line 1: | Line 1: | ||
| − | |||
| Line 5: | Line 4: | ||
TubeCAD Long | TubeCAD Long | ||
| − | Part Number | + | Part Number 123456789 |
Outer Diameter +12.70 mm ( +12 3/4 mm) | Outer Diameter +12.70 mm ( +12 3/4 mm) | ||
Revision as of 14:51, 24 October 2007
TubeCAD Long
Part Number 123456789
Outer Diameter +12.70 mm ( +12 3/4 mm)
Offset End One +0.00 mm ( 0 mm)
End to Tangent +48.03 mm ( +48 mm)
Point 1 to Point 2 +73.10 mm ( +73 mm)
Angle of Bend +90.2 deg (
Bend 1 Radius +25.00 mm ( +25 mm)
Tangent Distance +25.07 mm ( +25 mm)
Arc Length +39.34 mm ( +39 1/4 mm)
Arc Length Adjusted +39.34 mm ( +39 1/4 mm)
Point 2 to Point 3 +72.63 mm ( +72 3/4 mm)
Length Between Bends +22.62 mm ( +22 1/2 mm)
Rotation (+/- 180 Degrees) +0.0 deg ( SP)
Point 2 to Point 3 +72.63 mm ( +72 3/4 mm)
Angle of Bend +89.9 deg (
Bend 2 Radius +25.00 mm ( +25 mm)
Tangent Distance +24.95 mm ( +5 mm)
Arc Length +39.22 mm ( +39 1/4 mm)
Arc Length Adjusted +39.22 mm ( +39 1/4 mm)
Point 3 to Point 4 +148.20 mm ( +148 1/4 mm)
Length Between Bends +98.75 mm ( +98 3/4 mm)
Rotation (+/- 180 Degrees) -149.9 deg ( CW)
Point 3 to Point 4 +148.20 mm ( +148 1/4 mm)
Angle of Bend +88.8 deg (
Bend 3 Radius +25.00 mm ( +25 mm)
Tangent Distance +24.50 mm ( +24 1/2 mm)
Arc Length +38.76 mm ( +38 3/4 mm)
Arc Length Adjusted +38.76 mm ( +38 3/4 mm)
Point 4 to Point 5 +43.22 mm ( +43 1/4 mm)
Length Between Bends +12.04 mm ( +12 mm)
Rotation (+/- 180 Degrees) -88.0 deg ( CW)
Point 4 to Point 5 +43.22 mm ( +43 1/4 mm)
Angle of Bend +29.9 deg (
Bend 4 Radius +25.00 mm ( +25 mm)
Tangent Distance +6.68 mm ( +6 3/4 mm)
Arc Length +13.06 mm ( +13 mm)
Arc Length Adjusted +13.06 mm ( +13 mm)
Point 5 to Point 6 +93.78 mm ( +93 3/4 mm)
Length Between Bends +65.79 mm ( +65 3/4 mm)
Rotation (+/- 180 Degrees) -93.6 deg ( CW)
Point 5 to Point 6 +93.78 mm ( +93 3/4 mm)
Angle of Bend +80.9 deg (
Bend 5 Radius +25.00 mm ( +25 mm)
Tangent Distance +21.31 mm ( +21 1/4 mm)
Arc Length +35.30 mm ( +35 1/4 mm)
Arc Length Adjusted +35.30 mm ( +35 1/4 mm)
Point 6 to Point 7 +75.05 mm ( +75 mm)
Length Between Bends +36.29 mm ( +36 1/4 mm)
Rotation (+/- 180 Degrees) -78.5 deg ( CW)
Point 6 to Point 7 +75.05 mm ( +75 mm)
Angle of Bend +69.8 deg (
Bend 6 Radius +25.00 mm ( +25 mm)
Tangent Distance +17.46 mm ( +17 1/2 mm)
Arc Length +30.48 mm ( +30 1/2 mm)
Arc Length Adjusted +30.48 mm ( +30 1/2 mm)
Point 7 to Point 8 +73.22 mm ( +73 1/4 mm)
Length Between Bends +19.80 mm ( +19 3/4 mm)
Rotation (+/- 180 Degrees) -9.7 deg ( CW)
Point 7 to Point 8 +73.22 mm ( +73 1/4 mm)
Angle of Bend +110.4 deg (
Bend 7 Radius +25.00 mm ( +25 mm)
Tangent Distance +35.96 mm ( +6 mm)
Arc Length +48.16 mm ( +48 1/4 mm)
Arc Length Adjusted +48.16 mm ( +48 1/4 mm)
Point 8 to Point 9 +91.70 mm ( +91 3/4 mm)
Tangent to End +55.74 mm ( +55 3/4 mm)
Offset End Two +0.00 mm ( 0 mm)
Total Length +603.37 mm ( +603 1/4 mm)
Total Length Adjusted +603.37 mm ( +603 1/4 mm)
Cross Check +240.44 mm ( +240 1/2 mm)
