Difference between revisions of "Inspection Tolerances"

From ATTWiki
Jump to: navigation, search
(Linear)
Line 34: Line 34:
 
<td width=300>
 
<td width=300>
 
===Linear===
 
===Linear===
'''Change the values in VTube to whatever you want them be when you perform a project clear in the future.'''<br><br> Be sure that no tube data exits in this state, or VTube will clear the data to preset values with a tube.  (Of course, you can do this, if you really intend to do it.)</td>
+
'''This change effects the ends of the tube.'''<br><br> Change the value and press F2 on the keyboard or Refresh Parametrics in the upper right hand cornder of VTube</td>
 
<td>
 
<td>
 
[[image:vtubecloseup.png|700px]]
 
[[image:vtubecloseup.png|700px]]

Revision as of 15:20, 20 February 2023

Vtube-step logo 1.96.png Vtube-laser logo 1.96.png

VTS2 SplashScreen.png
Vtl screen hd scanner without logo.png



Different Tolerances

The tolerances inside the Inspection Tab can be adjusted to qualify parts to different standards.

Radial

Use the toolbar button to clear VTube.

Vtubeinspectiondata.png

Linear

This change effects the ends of the tube.

Change the value and press F2 on the keyboard or Refresh Parametrics in the upper right hand cornder of VTube

Vtubecloseup.png

Angular

Press the System Options button.



Other Pages