Difference between revisions of "FARO Arm Error Messages"

• Back to VTube-STEP
• Back to VTube-LASER

This is a dialog from the FARO driver - not VTube-LASER.

This problem can indicate a failure in the arm's electronics, the scanner itself, a problem with the driver, or a problem with the USB communications on the Windows computer.

Work arounds:

1 - Switch the FARO cable in the USB ports.

2 - If that fails, then uninstall and reinstall the driver.

3 - If they have another computer, they can try that to rule out computer port failure.

4 - If all of that fails, then they will need to call FARO for repair.

You can setup a VTube-LASER project in VTube-STEP.

However, some customers also want to setup the LASER mode MEASURE SETUP variables that are not available in STEP mode - and they want to do this in remote locations away from the FARO ScanArm computer. So they purchase VTube-LASER Programmer to do this.

The VTube-LASER PROGRAMMER version is identical to VTube-LASER except that it will not connect to a FARO arm to measure parts.

Programmer mode costs half of a regular VTube-LASER license.

All newer versions of VTube can load the project files from older versions of VTube.

Older versions don't recognize newer files, but newer versions can save in older file formats in the Save As Dialog as shown in the images on the right.

To determine the version of VTP file your VTube uses, click on the Save as Type pulldown list, and look for the latest version at the top of the list. VTube will, by default, always save the latest version of the VTP file.