Difference between revisions of "How to Install a MOXA Device Driver in Windows"
(→Search for a MOXA on the LAN using the DCU Software) |
(→How to Program a MOXA on the LAN: NPort Windows Driver Manager) |
||
Line 29: | Line 29: | ||
# Set the IP address of the computer port so that the first three octets match the MOXA just located. For example, in this case we use "192.168.126". Then we add ".1" to the end for the computer's IP address.<br><br> | # Set the IP address of the computer port so that the first three octets match the MOXA just located. For example, in this case we use "192.168.126". Then we add ".1" to the end for the computer's IP address.<br><br> | ||
# Load an internet browser and type the same address, but with .254 at the end. In this case, we type "192.168.126.254" in the address box and press Enter. The default login credentials are "admin" and "moxa".<br><br> | # Load an internet browser and type the same address, but with .254 at the end. In this case, we type "192.168.126.254" in the address box and press Enter. The default login credentials are "admin" and "moxa".<br><br> | ||
− | # The MOXA NPort Web | + | # The MOXA NPort Web Console page should display. Click on Network Settings, then click o Ethernet/Bridge Settings.<br><br> |
# Change the IP address to the new network scheme. (Often with this format: 192.168.1.nnn, were "nnn" is any number from 2 to 254). We recommend that you used "Static" if you want the MOXA to always remember its IP address.<br><br> | # Change the IP address to the new network scheme. (Often with this format: 192.168.1.nnn, were "nnn" is any number from 2 to 254). We recommend that you used "Static" if you want the MOXA to always remember its IP address.<br><br> | ||
# Click on Submit.<br><br> | # Click on Submit.<br><br> |
Revision as of 16:16, 30 March 2021
Use this video to learn how to install a MOXA device driver for connection to a bender for linking to a virtual COM port through a network.
|
How to Program a MOXA on the LAN: NPort Windows Driver Manager
Follow these steps to program a MOXA NPort with factory settings (the videos above assume that this has already been performed).
|
Search for a MOXA on the LAN using the DCU Software
Follow these steps to find a MOXA NPort with factory settings. 1 - Download and install the MOXA Device Search Utility |
6 - DSU will warn you of duplicate IP addresses. You can ignore this warning. |
8 - DSU will load a web browser and allow MOXA to serve a web page. |