Difference between revisions of "Revision: Benderlink for BLM 5"

From ATTWiki
Jump to: navigation, search
(Created page with "<table> <tr> <td> 350px<br><br> </td> <td> 250px </td> </tr> </table> __NOTOC__ ===25px ENHAN...")
 
(25px ENHANCED - Controls no longer disable during communication)
Line 11: Line 11:
 
__NOTOC__
 
__NOTOC__
  
===[[image:Check.jpg|25px]] ENHANCED - Controls no longer disable during communication===
+
===[[image:Check.jpg|25px]] ENHANCED - Reverse Rotation Switch===
The various controls would sometimes not paint as re-enabled after communications were finished, so the disable feature is no longer used.  Disabling the controls on the screen has no practical value as operators can see data being transferred and know not to touch the screen during transfer.
+
Benderlink now has a reverse rotation switch in the Bender Network setup because some BLM benders can have reversed rotation directions in order to make the bender comply with other bender rotation directions. (By default, BLM rotates positive clockwise, which is the opposite of most CNC benders.)<br><br>
<br><br>
+
  
 
===[[image:Check.jpg|25px]] ENHANCED - Adjust Bender Data Change===
 
===[[image:Check.jpg|25px]] ENHANCED - Adjust Bender Data Change===

Revision as of 14:09, 20 July 2013

Benderlink blm logo.jpg

Blm e-bend76.jpg


Check.jpg ENHANCED - Reverse Rotation Switch

Benderlink now has a reverse rotation switch in the Bender Network setup because some BLM benders can have reversed rotation directions in order to make the bender comply with other bender rotation directions. (By default, BLM rotates positive clockwise, which is the opposite of most CNC benders.)

Check.jpg ENHANCED - Adjust Bender Data Change

The float-edit fields in the Adjust Data dialog now responds to the Enter key after the number has been entered.

Check.jpg FIX - Removed Errors from Shutdown

A new compile with new skin engine resolved the shutdown errors in earlier versions.



Other Pages